Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
I got a “pingback” that another site was linking to my blog article “Magic Leap Fiber Scanning Display (FSD) – “The Big Con” at the “Core.” It turned out that the article, “Magic Leap is a Tragic Heap” was a…
Just a quick, but timely note today. I was asked by iFixit to help them identify the optical components for their Magic Leap One (ML1) teardown published today. The picture above is from iFixit but with my labeling. It turns out…
It is perhaps fitting that I make this announcement on the 4th of July as I am joining up with RAVN, a company led by a former Navy SEAL. The last six and half years, this blog has been studying…
Introduction In live video event that Magic Leap billed as “Meet Magic Leap One” (MLO) and promoted as, “Tune in to Twitch at 2 pm ET today as we walk you through the Magic Leap One hardware and platform.” For…
Just a quick note. I have been doing quite a bit of traveling lately and have not had time to update the blog. I’m going to be attending AWE 2018 in Santa Clara next week, May 29th through June 1st.…
Introduction Rony Abovitz, CEO of Magic Leap, gave me a couple of shout-outs on his Twitter feed. I have cut and pasted images from the feed at the end of this article. I wanted to make a quick to respond…
My last blog article on the Terrible View of the Real World through the Magic Leap One made the Top Story on Hacker News. That good news set off a series of events that took the site down. The traffic was…
Introduction In my last post, I discussed the process of building my Magic Leap One (ML1) view simulator model (hereafter referred to as “model”), and now I would like to show you what the view of the real world will…
I wanted to share with you some pictures of a project I am calling “The Magic Leap One (ML1) experience.” After writing my earlier article Magic Leap One – FOV and Tunnel Vision, I realized that there was enough information…
Jason McDowall has posted parts 2 and 3 of his “The AR Show Podcast” interview with me. Links to the show are below or you can subscribe to the podcast. Karl Guttag (KGOnTech) on Microdisplay Technologies and the Hype of…
