Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
As per my previous post Magic Leaps display technology what Magic Leap is using in their YouTube through the lens demos may or may not be what they will use in the final product.…
So, what display technology is Magic Leap (ML) using, at least in their posted videos? I believe the videos rule out a number of the possible display devices, and by…
So what is Magic Leap doing? That is the $1.4 billion dollar question. I have been studying their patents as well as videos and articles about them and frankly a…
Microsoft’s Hololens is perhaps the most most well known device using flat “waveguide” optics to “combine” the real world with computer graphics. Note there are no actual “holograms” anywhere in Hololens by…
In general, people find the combining of an image with the real world somewhat magical; we see this with heads up displays (HUDs) as well as Augmented/Mixed Reality (AR/MR) headsets.…
I’m planning on following up on my earlier articles about AR/VR Head Mounted Displays (HMD) that also relate to Heads Up Displays (HUD) with some more articles, but first I…
Wrist Projectors are the crowdfund scams that keeps on giving with new ones cropping up every 6 months to a year. When I say scam, I mean that there is…
I apologize for being away for so long. The pictures above and below were taken over a year ago and I meant to format and publish them back then but some…
On the left are a series of power measurements I made on the Celluon PicoPro projector with an optical engine designed by Sony using a Microvision scanning mirror. The power…
Today I’m going to give a bit of a guided tour through the Celluon optical path. This optical engine was developed by Sony probably based on Microvision’s earlier work and using Microvision’s…
At Lenovo at their Tech World on May 27th 2015 showed a Laser Beam Scanning (LBS) projector integrated into a cell phone prototype (to be clear, a prototype and not a product). White…
The startup IRIS has started and Indiegogo presale campaign for not just one (a major challenge for a new company) but two different HUD designs, one “laser” and one DLP based.…
I received concerns that the chroma aberrations (color fringes) seen in the photos in Part 2B were caused by poor alignment of the lasers. I had aligned the lasers…
June 6th 2015 – Note, I am in the process of updating this analysis with new photos. The results are not dramatically different but I was able to improve the…
